No data

No data

undefined

undefined

FAQs

Q

Blowing machine common problems and troubleshooting methods

+

A

Reasons: 1、Heating temperature is too high; 2、Heating time is too long; 3、Compressed air contains water; 4、Injection molding blanks themselves are not transparent; 5、Blanket design is not suitable; 6、Blowing and expansion ratio is too small.

Q

Blowing machine bottle bottom concave present causes and solutions

+

A

1、Bottom of the bottle is not enough base material Solution: Reduce the heating temperature of the bottom of the bottle 2、Bottom of the bottle heating temperature is too high Solution: adjust the bottle bottom heating temperature to the right temperature, different manufacturers have slightly different temperature adjustment, adjust the temperature can consult the bottle blowing machine manufacturers. 3、Insufficient pre-blowing gas Solution: extend the pre-blowing time 4、Insufficient high pressure Solution: Increase the amount of high pressure blowing

< 1 > Go to