No data

No data

Blowing machine bottle bottom concave present causes and solutions

1、Bottom of the bottle is not enough base material

Solution: Reduce the heating temperature of the bottom of the bottle

2、Bottom of the bottle heating temperature is too high

Solution: adjust the bottle bottom heating temperature to the right temperature, different manufacturers have slightly different temperature adjustment, adjust the temperature can consult the bottle blowing machine manufacturers.

3、Insufficient pre-blowing gas

Solution: extend the pre-blowing time

4、Insufficient high pressure

Solution: Increase the amount of high pressure blowing

FAQ

Blowing machine common problems and troubleshooting methods

2021-09-26

Blowing machine bottle bottom concave present causes and solutions

2021-09-26